-
Is the sealing cylinder pressure enough?
If you choose a low-pressure sealing cylinder, the low-pressure pressure can be kept below 8 kg, which is no problem for ordinary water bottles. But it also depends on the high-pressure blowing pressure. If the high-pressure blowing pressure is too large, the sealing cylinder will be pressed down. If the high-pressure pressure is reduced, it can also be blown into a bottle shape. Try to reduce the high-pressure pressure, or if the high-pressure pressure is too large, the clamping pressure will be reduced. If it is too small, the mold will be opened, and it will also cause air leakage in the seal, which can increase the automatic mold clamping pressure.
-
Whether the sealant is damaged or aligned with the seal.
If it deviates from the seal, it will leak air.
-
Whether the sealing cylinder block or seal is damaged.
If the seal is damaged, it can be directly reflected by opening the solenoid valve of the sealing cylinder.
-
Whether the solenoid valve of the sealing cylinder is leaking or stuck or the exhaust is not smooth.
These are also the reasons that affect the leakage of the sealed cylinder.